BHBCQ - GRAY 36375
- MSDS: BHBCQ
- Manufacturer: NATIONAL AEROSOL PRODUCTS CO
- Product Name: GRAY 36375
- National Stock Number: 8010-01-067-1139
Product Identification
Product ID:GRAY 36375
MSDS Date:01/01/1987
FSC:8010
NIIN:01-067-1139
MSDS Number: BHBCQ
Responsible Party
LOS ANGELES, CA 90021
Emergency Phone: (213) 627-2668
Info Phone: (213) 627-2668
Cage: 59986
Contractor
Cage: 59986
Ingredients
VINYL TOLUENE ALKYD
Fraction By Weight: <10%
PIGMENT
Fraction By Weight: <10%
BINDERS, TYPE UNSPECIFIED
Fraction By Weight: <10%
MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100)
CAS: 64742-88-7
Fraction By Weight: 26%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 34%
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: <30%
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT; 9192
ISOBUTANE
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: <30%
OSHA PEL 1800 MG/CUM
ACGIH TLV: 1000 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: NAUSEA. EYES: IRRITATION.
INHALATION: ANESTHETIC. SKIN: MINOR IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: NAUSEA. EYES: IRRITATION.
INHALATION: ANESTHETIC. SKIN: MINOR IRRITATION.
First Aid
First Aid:INGESTION: DON'T INDUCE VOMITING. GET IMMEDIATE MED ATT.
EYES: FLUSH W/WATER FOR 5 MINUTES. INHALATION: REMOVE TO FRESH AIR.
CALL PHYSICIAN. GIVE MOUTH-TO-MOUTH RESUCITATION IF BREATHING
STOPS. SKIN: WASH W/WATER. SEEK MEDICAL HELP.
Fire Fighting
Flash Point:<25F
Extinguishing Media:WATER FOG, FOAM, CO2, DRY CHEMICAL, HALON
Fire Fighting Procedures:USE EQUIPMENT/SHIELDING TO PROTECT PERSONNEL
AGAINST BURSTING/WELDING CONTAINERS.
Unusual Fire/Explosion Hazard:DON'T USE NEAR OPEN FLAME, FIRE/WHILE
SMOKING. TEMPERATURES >120F MAY CAUSE BURSTING/VENTING. KEEP
CONTAINERS COOL.
Accidental Release
Spill Release Procedures:MOP UP, SOAK UP/WIPE UP IMMEDIATELY. PROVIDE
VENTILATION. DISPOSE.
Handling
Handling and Storage Precautions:DON'T STORE WHERE TEMPERATURE IS
>120F.
Exposure Controls
Respiratory Protection:ADEQUATE VENTILATION IS REQUIRED.
Ventilation:PROVICE ADEQUATE LOCAL EXHAUST VENTILATION.
Protective Gloves:REQUIRED FOR PROLONGED CONTACT
Eye Protection:RESISTANT
Other Protective Equipment:NORMAL PROTECTIVE CLOTHING.
Supplemental Safety and Health
Chemical Properties
Vapor Pres:40-50
Vapor Density:>AIR
Spec Gravity:0.976
Solubility in Water:SLIGHT
Appearance and Odor:PAINT/SOLVENT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAME, FIRE/SMOKING.
Disposal
Waste Disposal Methods:DON'T PUNCTURE/INCINERATE EMPTY/FULL CANS. ONCE
SPILLS/LEAKS ARE CLEANED UP, DISPOSE OF WASTE IN ACCORDANCE
W/GOVERNMENTAL ORDINANCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.